41 31 07 BrningMan. 4web, Łucznictwo, Instrukcje obsługi łuków

[ Pobierz całość w formacie PDF ]
Compound Bow
USER’S GUIDE
VERY IMPORTANT
: SAVE THIS BOOKLET. CAREFULLY READ ALL
INSTRUCTIONS IN THIS MANUAL BEFORE USING YOUR NEW BOW.
Compound Bow
USER’S GUIDE
WELCOME TO THE BROWNING AR CHERY FAMILY
Thank you from the entire Browning Archery family for purchasing a Browning Archery bow. Your Browning
Archery bow was manufactured from the finest materials available and handcrafted with pride in the USA. With
proper care and use you will enjoy this product for years to come.
We at Browning Archery wish you much success in the archery field you have chosen to pursue.
Please read this entire booklet before shooting or adjusting your bow.
Remember, most adjustments to a compound bow should be made by your authorized Browning Archery dealer.
Whenever shooting a bow, be certain of your target as well as what else lies downrange.
SAFETY
As with any shooting activity, safe operation of your Browning Archery
bow must always be the highest priority. ALWAYS WEAR SAFETY
GLASSES WHEN HANDLING A BOW. Do not attempt to use your
bow without proper instruction. Doing so can result in serious injury.
a. Never "dry-fire" any bow. Dry-fire is to draw and release the bowstring without an arrow in the bow.
Dry-firing will likely cause damage to the bow and serious injury to the archer. If you ever dry-fire your
Browning Archery bow, take it to an authorized Browning Archery dealer for proper inspection.
b. Always be sure of your intended target, as well as what lies behind the target area. An arrow can travel
a considerable distance, so it is important to have a safe and sound backstop.
c. If you draw a bow and need to let it down, do so in a slow and careful manner. Keep your support arm
straight and prepare for a rapid and aggressive let-down as the bow returns to peak weight. Avoid hitting
your hand on protruding accessories such as the cable guard or quiver. Keep your head and face back and out
of the string path during let-down.
d. Never modify any part of the bow or its components by drilling extra holes or removing material. This voids
the warranty and presents safety problems.
e. Never draw a bow with a peak weight above your comfort level.
f.
Always use a bow sling when drawing and shooting a bow.
CONTACT US
BROWNING AUTHORIZED SERVICE
520-838-2004
www.browning-archery.com
Browning Archery
Warranty Registration
Your local authorized Browning Archery dealer is your best source for
information and assistance. Visit them for these and other typical services.
• Adjusting draw length and draw weight
• Replacing / servicing strings and cables
• All aspects of bow tuning
• Correct arrow selection
• Cleaning and lubrication
• Mounting new accessories
• Adjusting tiller
P.O. Box 5487
Tucson, Arizona 85703
2
Compound Bow
USER’S GUIDE
BOW TERMINOLOGY
IDLER WHEEL
LIMB
BOW
QUIVER
CABLE
SIGHT
PEEP
SIGHT
RISER
SHELF
CABLE
GUARD
SLIDE
STABILIZER
ARROW
REST
CABLE
GUARD
LIMB
BOLT
NOCK
POINT
GRIP
STRING
BOW
SLING
LIMB
POCKET
CAM
ARROWS
3
Compound Bow
USER’S GUIDE
GENERAL OPERATING INSTRUCTIONS
• Always inspect your bow thoroughly before each shooting session to ensure
that it is in good working order. Check for worn or missing components and
have them replaced as required.
• Inspect your arrows to insure that they are straight, un-damaged, not cracked
and that each nock is in good condition. A cracked nock can break when fired
from the bow and cause the bow to "dry fire" which can cause injury to the
archer and damage to the bow.
• When purchasing arrows for your bow, consult the
selection chart from the arrow manufacturer and
select he correct arrow for your application. Always
use an arrow that meets the weight requirement
stated in the warranty. Failure to do so could cause
personal injury and damage to your bow.
BOW MAINTENANCE
Your Browning Archery bow will give you many years of service if
maintained and cared for properly.
• Keep synthetic cables and string waxed. Apply bow string wax to
your synthetic cables and string before each shooting session.
• Strings and cables must be replaced periodically. A worn cable
or string can suddenly break, causing serious injury to the archer and
damage to the bow. It is recommended that the string and cables be
replaced every 5,000 shots or 12 months, whichever comes first.
• Always store your bow in a cool dry place. High temperatures, such as
those that can occur in a trunk or interior of a vehicle, can cause
serious damage to your bow.
•
After use in high humidity or damp conditions, wipe
metal components of bow with a light oil.
4
Compound Bow
USER’S GUIDE
SETTING UP YOUR BOW
Nocking Point Placement:
Finger shooters: For the initial
setting, install the nocking point on the bowstring approximately
5/16” plus the arrow width above a point where a horizontal line
from the rest intersects the string.
Release Aid Shooters:
Install the nocking point the width of
the arrow above a point where a horizontal line from the rest
intersects the string. When the arrow is in position on the rest, the
arrow nock should fit snug against the bottom of the nocking point.
Arrowrest Adjustment:
The in/out position of the arrowrest
should be adjusted so that the arrow is in alignment with the
string when shooting with a release aid. The arrow tip should be
one-half shaft diameter to a full shaft to the left on a right-
handed bow, (opposite for left-handed) when shooting with
fingers.
Sight Adjustment:
When adjusting the sight pin locations,
always remember to "follow the group". That is, if the shot group
is to the left of the target, move the sight pins to the left. If the
shot group is low, move the sight pins down.
before
after
Cable Guard Adjustment:
The purpose of a cable guard is to hold the cables
out of the path of the arrow. Many Browning Archery bows have a non-adjustable
cable guard. When adjusting the angle of an adjustable cable guard, adjust it so the
cables just clear the arrow vanes. Excessive arrow clearance may cause the cables to
track incorrectly on the wheels and cause serious personal injury and/or damage to
the bow. Always adjust the cable guard with the rod in the up position
(approximately 1 o'clock for a right-handed bow).
Cam-Lock
™
Cable Guard Instructions:
1. Insert cable guard into riser as shown.
2. Insert socket head cap screw and unthreaded half of clamp (A) into hole on the
sight window side of riser (align quarter round cut out with cable guard).
3. Insert threaded half of clamp (B) into opposite side of riser (align quarter round
cut-out with cable guard rod) and thread cap screw, but do not tighten.
4. Rotate cable guard rod (as shown) to achieve clearance. Then
tighten cap screw.
Please note the rod should be adjusted only as far as needed to achieve
clearance (cable should line up with back edge of riser - as shown).
A
B
5
[ Pobierz całość w formacie PDF ]

  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • styleman.xlx.pl

    		•