5000ser, STREFA LAPTOP, tryb SERWIS TOSHIBA

[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
5000 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. 5mm Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
5000 Series
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5000 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
release lever
PC Card
Battery pack
Eject button
1. Turn the computer upside down as shown.
2. Slide the
battery release lever
in the direction of the
arrow.
3. Lift out the
battery pack
.
4. Separate the battery pack from the battery cover.
1. Press the
eject button
of the PC Card you want to
remove.
2. Press the extended
eject button
to pop the
PC card
out slightly.
3. Grasp the
PC Card
and pull it out
NOTE
: Before removing any PCMCIA device, make
make it is “STOPPED” in the PC Card Manager.
HDD REMOVAL
HDD cover
M2.5x4 black flat head screw
HDD bracket handle
HDD assy
1. Turn the computer upside down.
2. Remove
one M2.5x4 black flat head screw
securing
HDD slot cover
and pull out the
cover
.
3. Grasp the
HDD bracket handle
and pull to
disconnect the HDD assembly.
4. Lift the
HDD assembly
out of the HDD bay.
.
TOSHIBA
Tough Enough for Today’s World
 FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5000 Series
HDD REMOVAL
MEMORY MODULE REMOVAL
Memory
cover
M3x4 Flat head screws
HDD bracket
M2.5x4 black flat head screws
5. Remove
four M3x4 brass flat head screws
securing the
HDD bracket to the drive.
1. Turn the computer upside down.
2. Remove
two M2.5x4 black flat head screws
securing the memory cover.
3. Lift out the
cover
.
MEMORY MODULE REMOVAL
MINI PCI CARD REMOVAL
Memory
module
Mini
PCI slot
cover
Memory clips
M2.5x4 black torx screws
4. Gently press out on the
memory clips
and pull the
memory module out of the connector on a 45 degree
angle.
1. Turn the computer upside down.
2. Remove
two M2.5x4 black torx screws
securing
the Mini PCI slot cover.
TOSHIBA
Tough Enough for Today’s World
 FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5000 Series
MINI PCI CARD REMOVAL
MODEM BOARD REMOVAL
Mini PCI
card
PCI clips
Modem slot cover
M2.5x4 black flat head screws
3. Gently press out the
Mini PCI slot clips
and pull the
Mini PCI card
out of the connector on a 30 degree
angle.
1. Remove
two M2.5x4 black flat head screws
securing
the modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
MODEM BOARD REMOVAL
KEYBOARD REMOVAL
Latch
Modem
M2x3 black screws
MJ Harness
Keyboard holder
3. Disconnect the
MJ harness
from JP1 on the modem board
and PJ108 on the system board.
4. Remove
two
M2x3 black screws
securing the
modem board.
5. Lift up the
modem board
to disconnect it from the
system board.
1. Open the display panel.
2. Remove the
keyboard holder
at the top of the
keyboard.
TOSHIBA
Tough Enough for Today’s World
  [ Pobierz całość w formacie PDF ]

  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • styleman.xlx.pl

    		•